Basic Mechanical

To study Simple Steam Turbine – Mechanical Practical

A steam turbine is a device that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. This device uses a rotary motion because it is best suited motion used to derive

To perform Rockwell hardness test on given Specimen -Mechanical Practical

The Rockwell hardness test method is the most commonly used hardness test method. The Rockwell method measures the permanent depth of indentation produced by a force/load on an indenter. The Rockwell scale is a hardness scale based on indentation hardness

To study 2 Stroke Engine Model – Mechanical Practical

This is a practical to explain the working of a 2 Stroke engine with proper explanation and diagram. A two-stroke, or two-cycle, engine is a type of internal combustion engine which completes a power cycle with two strokes (up and down

To study 4 stroke IC Engine Model – Mechanical Practical

A four-stroke engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning a crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either direction. The four separate

To study Window type Air Conditioner (AC) – Mechanical Practical

Air conditioning (or AC) is the process of altering the properties of air, primarily temperature and humidity, to more comfortable conditions.In common use, an air conditioner is a device that lowers the air temperature and Window type air conditioners are one of the most

Study of Vapour Compression Refrigeration unit – Mechanical Practical

Refrigeration is the transportation of heat from one location to another location to lower the temperature in an controlled environment. In a vapour compression refrigeration unit, the refrigerant undergoes phase changes which is one of the many refrigeration cycles and

To conduct Tensile test on UTM – Mechanical Practical

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. Tensile strength of an can be measured by testing it with an Universal Testing

To conduct Impact Test on Impact testing machine – Mechanical Practical

Impact Testing is used to measure an object’s ability to resist high-rate loading. It is usually thought of in terms of two objects striking each other at high relative speeds. The Charpy/Izode impact test (or Charpy V-notch test) is a standardized high strain-rate